Skip to content

Continental Launches Special CDS Cargo Belt Drive for e-Cargo Bikes

Conti Drive System now has three product lines: premium, eco, and cargo New 12 mm cargo product line for special applications such as e-Cargo bikes New 8 mm carbon belt for the CDS Premium product line With the CDS cargo product line, Continental is presenting a special belt drive variant developed for e-cargo bikes, and … Continued

  • Conti Drive System now has three product lines: premium, eco, and cargo
  • New 12 mm cargo product line for special applications such as e-Cargo bikes
  • New 8 mm carbon belt for the CDS Premium product line

With the CDS cargo product line, Continental is presenting a special belt drive variant developed for e-cargo bikes, and is thus improving the everyday suitability of electrically powered cargo bikes in particular. This product line is made up of aluminum/stainless steel sprockets 12 mm in width, and a carbon belt 12 mm in width. These are mainly designed for high loads. This means that the advantages of a Continental belt are transferred to the cargo bicycle segment, the target group for which places special demands on commercial vehicles. In particular, the easy and maintenance-free handling and higher service life contribute to better everyday suitability, and thus to an upgrading of cargo bicycles. Derived from the launch of a carbon belt, a carbon belt 8 mm in width is being added to the CDS premium variant, to be used in combination with special transmissions or e-bike drives.

New CDS cargo product line with carbon belts for special types of applications
Unlike the 8 mm width in the premium and eco variant, the new cargo line features belt sprockets 12 mm in width made of aluminum/stainless steel, complemented by a 12 mm carbon belt. This product line is aimed in particular at special types of applications such as e-cargo bikes, in which particularly high loads act on the belt drive. The belt’s wider sprockets and carbon tensile members result in a much higher upper load limit, and are designed for a maximum gross vehicle weight of 290 kg. An initial sample application for CDS cargo is the e-cargo bike from Hercules.

The new 12 mm carbon belt is based on the 14M tooth profile of the existing aramid belt, and thus offers the familiar advantages of a Continental belt:

  • Lower belt tension, and hence better protection for internal bearings and hubs
  • Easy to handle and almost maintenance-free (no oils)
  • High tolerance values regarding parallelism and angle errors
  • Light and clean thanks to a dry run
  • Pleasant and quiet ride comfort

Three CDS product lines for optimum drive variants
The new CDS cargo line joins the existing product lines CDS premium and eco, and complements them perfectly in terms of different applications for belt-drive systems. Continental thus offers belt-drive systems for different bicycle designs. Entry-level belt models, higher-quality bicycles, or special cargo bicycles: the Conti Drive system offers an optimally designed belt drive variant for every bicycle segment.

In addition to the new CDS cargo product line, a carbon belt 8 mm in width is being added to CDS premium. Since CDS premium already offers numerous possible uses for all conventional hub gear shifts, e-bike drives, and transmissions, the8 mm carbon belt constitutes an additional alternative for bicycle manufacturers. With 30 percent more tractile force compared with the 8 mm aramid belt, the carbon variant is used in particular for specifications with increased force transmission or bicycle designs with a high load potential. In particular, transmissions with a high stage reduction as well as drives with a very high torque are among the recommended applications.

Welcome back , to continue browsing the site, please click here